NEC DS1000 Feature Handbook page 117

To program a System Speed Dial number:
store System Speed Dial numbers. Find out from
your Communications Manager if you can.
1. Press
OR
Press
2. Dial the system bin number (normally 200-299).
3. Press
4. Enter the line number you want the system to use when
dialing your stored number (e.g., 1 for line 1).
OR
Enter the line group number you want the system to use
when dialing your stored number (e.g., 90 for group 0).
OR
Press
5. Press
6. Enter the number you want to store (up to 16 digits long).
and *. To insert a pause in your Speed Dial number,
press
number, press
7. Press
8. Enter a name for the Speed Dial number.
9. Press
Normally, only attendants and supervisors can
and dial
PGM SPD
+
.
if you want to enter Intercom codes.
.
You can enter any combination of the digits 0-9, #
. To insert a Flash in your Speed Dial
MIC
FLASH
.
See Entering Speed Dial names for more.
.
Speed Dial
.
.
. These entries count as digits.
111