GE T35 Instruction Manual page 215

Transformer protection system
Hide thumbs Also See for T35:
Table of Contents

Advertisement

CHAPTER 5: SETTINGS
To enable the security system and require password use:
1.
Select the Security > User Management menu to open the user management window.
2.
Enable the Enable Security check box in the lower-left corner to enable the security management system.
3.
Click the Ok button.
If you force password entry by using this feature, ensure that you know the Administrator password. If you do not
know the password and are locked out of the software, contact GE Grid Solutions for the default password of a UR
device. When using CyberSentry, the default password is "ChangeMe1#".
Security is now enabled for the EnerVista UR Setup software. Upon starting the software, users are now required to enter a
username and password.
Add a new user
The following pre-requisites are required to add user accounts to the EnerVista security management system:
The user adding the account must have administrator rights
The EnerVista security management system must be enabled (previous section)
To add a user account:
1.
Select the Security > User Management item from the top menu to open the user management window.
2.
Enter a username in the User field. The username must be four to 20 characters in length.
T35 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL
PRODUCT SETUP
5
5-13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents