Maintenance; Cleaning And Storage; Battery Replacement - Extech Instruments MA260 User Manual

200a true rms open jaw clamp meter with auto sensing technology
Table of Contents

Advertisement

Maintenance 
 WARNING: To avoid electrical shock, disconnect the meter from any circuit, remove the 
test leads from the input terminals and turn OFF the meter before opening the case. Do not 
operate with an open case. 
Cleaning and Storage 
Periodically wipe the case with a damp cloth and mild detergent; do not use abrasives or solvents. 
If the meter is not to be used for 60 days or more, remove the batteries and store them separately. 
Battery Replacement 
1.
Remove the small (middle) Phillips head screw at the back of the meter.  
2.
Open the battery compartment 
3.
Replace the two 1.5V AAA batteries observing correct polarity. 
4.
Re‐assemble the meter before use 
5.
Safety: Please dispose of batteries responsibly; never dispose of batteries in a fire, batteries 
may explode or leak; never mix battery types, install new batteries of the same type. 
 
 
800.561.8187
Never dispose of used batteries or rechargeable batteries in household waste. 
As consumers, users are legally required to take used batteries to appropriate 
collection sites, the retail store where the batteries were purchased, or 
wherever batteries are sold. 
Disposal: Do not dispose of this instrument in household waste. The user is 
obligated to take end‐of‐life devices to a designated collection point for the 
disposal of electrical and electronic equipment.  
www.
10
information@itm.com
.com
MA260‐en‐GB_V1.1   5/15 

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MA260 and is the answer not in the manual?

Questions and answers

Table of Contents