Table of Contents
Advertisement
Storage and Maintenance
• To clean the probe, wipe with a soft cloth dampened with a mild
detergent and clean water. Do not use abrasive detergents. Do
not use corrosives or solvents to clean the probe. Use a high
quality lens cleaning fluid and a lint-free swab to clean the cam-
era and worklight lenses.
• To protect the camera, keep the lens cap, and other supplied
protective coverings, attached when not in use. Store in the origi-
nal case.
• Straighten the neck angle before placing in storage.
• Avoid direct sun exposure. Store in a cool, dry, and well-venti-
lated area.
• Do not coil the probe < 6 in. (15 cm) in diameter when storing,
damage to the probe may result.
Specifications
HD Camera resolution
Frame rate
Probe diameter
Probe head diameter
Probe head length
Probe length
Articulation angle
Probe head material
Probe body material
Worklights
Field of View (FOV)
Depth of Field (DOF)
Operation and Storage
temperature
#NAS100125; r. AB/88002/88004; en-US
1280(H) x 720(V) pixels
30 frames per second (fps)
0.15 in. (3.9 mm)
0.2 in. (4.5 mm)
0.5 in. (17 mm)
3.3 ft (1 m)
180° maximum (the angle may decrease if
the probe is looped)
Stainless steel
Braided mesh stainless steel
LED lamps encircle the camera lens
90°
0.4 to 4.0 in. (1 to 10 cm)
14℉ to 140℉ (–10℃ to 60℃)
5
Advertisement
Table of Contents
