Subscribe to Our Youtube Channel
Related Manuals for Extech Instruments MA410T
Summary of Contents for Extech Instruments MA410T
- Page 1 User Guide 400Amp True RMS AC Clamp Meter + NCV Model MA410T GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com...
- Page 2 Thermocouple Temperature and Non-Contact Voltage detection. The double molded case is designed for heavy duty use. This meter is shipped fully tested and calibrated and, with proper use, will provide years of reliable service. Extech Instruments is an ISO-9001 Certified company. Safety...
- Page 3 If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired. Function Maximum Input A AC, 400A V DC, V AC 600V DC/AC Resistance, Capacitance, Frequency, Diode 250V DC/AC Test, Continuity, Temperature MA410T-EU-EN-V1.0-7/12 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com...
-
Page 4: Meter Description
Hertz (Frequency) Duty Ratio F and Fahrenheit and Celsius units (Temperature) n, m, , M, k Unit of measure prefixes: nano, milli, micro, mega, and kilo Continuity test Diode test MA410T-EU-EN-V1.0-7/12 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com... -
Page 5: Operation
Press the trigger to open jaw. Fully enclose only one conductor. Read the current value in the display. If the value is less than 40A, rotate the function switch to the 40A position to improve resolution. MA410T-EU-EN-V1.0-7/12 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com... - Page 6 Press the MODE button to select the DIODE mode. The Diode symbol will appear in the display. Press the MODE button to select the Continuity mode. The continuity symbol will appear in the display. If the resistance is <150 ohms the tone will sound. MA410T-EU-EN-V1.0-7/12 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com...
-
Page 7: Capacitance Measurements
To turn the meter on again, change the position of the function switch. Low battery indication When the icon appears in the display, the battery should be replaced. Refer to the battery replacement procedure in the maintenance section. MA410T-EU-EN-V1.0-7/12 GlobalTestSupply www. .com Find Quality Products Online at:... -
Page 8: Maintenance
/ accumulators are sold! Disposal in household trash or refuse is prohibited! Disposal: Follow the valid legal stipulations in respect of the disposal of the device at the end of its lifecycle. MA410T-EU-EN-V1.0-7/12 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com... -
Page 9: Specifications
-4.0 to 1400°F 0.1° <400° ±(3% + 9°F/5°C) Type K -20 to 760°C 1° >400° Specification does not include probe accuracy. Range of supplied probe is -4 to 482°F (-20 to 250°C). MA410T-EU-EN-V1.0-7/12 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com... - Page 10 IEC1010-1 (2001): EN61010-1 (2001) Overvoltage Category III 600V, Pollution Degree 2. Approvals Copyright © 2012 Extech Instruments Corporation (a FLIR company) All rights reserved including the right of reproduction in whole or in part in any form ISO-9001 Certified www.extech.com...
Need help?
Do you have a question about the MA410T and is the answer not in the manual?
Questions and answers