Connection Of The Control Board Version S; Assignment Of The Control Terminal Strip X2A; Assignment Of Socket X2B - KEB Combivert R6 Instruction Manual

Connection of the Control Board
4.5

Connection of the control board version S

4.5.1 Assignment of the control terminal strip X2A

PIN Function
10 24V input
11 Mass
12 Digital input 1
13 Digital input 2
14 Digital input 3
15 Digital input 4
16 Digital in-/output
17 24 V-output
18 Mass
19 Digital output 1
20 Digital output 2
21 Analog output
22 24 V-output
23 Mass
24 Relay 1 / NO contact
25 Relay 1 / NC contact
26 Relay 1 / switching
contact
27 Relay 2 / NO contact
28 Relay 2 / NC contact
29 Relay 2 / switching
contact
*) The relay outputs must be operated with max. 48 V DC protective separation voltage to guarantee the CE standard. After consultation KEB
a current of max. 1 A DC is permissible for 120 V AC.

4.5.2 Assignment of socket X2B

RJ45 socket for phase synchronization and tem-
perature sensor
1
The connection is made with a standard patch cable 1:1 with the socket X2B, X2C or X2D at the commutation
reactor.
10 11 12 13 14 15 16 17 18 19 20 21 22 23
Core cross-section 0,14...1,5 mm², tightening torque 0,5 Nm
Name Description
Uin External supply of the control board
COM Reference potential
ST Control release / reset
I1 programmable
I2 programmable
I3 programmable
I/O (I4) Active signal (connection of all R6
at parallel operation in master-slave
procedure)
Uout Voltage supply for in- and outputs
COM Reference potential
O1 Transistor output (DC > CP.19)
O2 Transistor output (error message)
ANOUT Difference to mains frequency (CP.18)
Uout see terminal 17
COM Reference potential
RLA
Relay output
RLB
Ready signal (no error)
RLC
FLA
Relay output
FLB
(DC > CP.19 and tightened load-shunt)
FLC
8
X2A
24 25 26 27 28 29
No. Name Function
1 t1
Connection for temperature sensor (option)
2 t2
3 U13_syn Synchronization phase 1 / 3
4 – reserved
5 U21_syn Synchronization phase 2 / 1
6 – reserved
7 U32_syn Synchronization phase 3 / 2
8 – reserved
Specifications
23...30 V DC / 1 A
Ri: 4,4 kΩ
ca. 24 V / max. 100 mA
I : 25 mA
max
I : 25 mA
max
0...±10 V / max. 5 mA
max. 30 V DC *)
0,01...2 A DC
max. 30 V DC *)
0,01...2 A DC
GB - 31