Installation; Emc-Compatible Control Cabinet Installation; Installation Instructions - KEB Combivert R6 Instruction Manual

Installation

4. Installation
4.1

EMC-compatible control cabinet installation

1 Main fuse
2 Main contactor
3 Harmonic filter (or 6)
4 COMBIVERT R6
5 Side-mounted EMI filter (≥ size 25)
Sub-mounted EMI filter (≤ size 19)
6 Commutation reactor (or 3)
7 Frequency inverter
8 if necessary external DC fuses
9 Motor lines
10 A Protective Earth (PE) on the mounting
plate power circuit
10b Protective Earth (PE) on the mounting
plate control circuit
10c Equipotential bonding with the
housing earth
11 Mains connection power circuit
11 A Mains connection control circuit
12 Control lines
Large area contact at the mounting
plate
4.2

Installation instructions

• Stationarily install and earth COMBIVERT.
• The device must not be permeated by mist or water.
• Allow for sufficient heat dissipation if installed in a dust-proof housing.
• Install the COMBIVERT in an appropriate housing in accordance with the local regula-
tions when operating it in explosion-endangered spaces.
• Protect COMBIVERT against conductive and aggressive gases and liquids.
• The lines of the R6-S commutation reactor must be limiting to 50 cm.
• The frequency inverters must be placed in the immediate environment of the R6-S.
12
2
1
11a
11
10c
Control circuit
150 mm
150 mm
5
4
3/6
10b
10a
Power circuit
7
30 mm
8
9
Direction of the cooling fins
GB - 19