Configuration - Inolab pH level 2 Instruction Manual

4.6
You can adapt the pH meter to your individual requirements.
To do this, the following parameters can be changed (the
status on delivery is marked in bold):
Baud rate
Data transmission inter-
val (Int 2)
Calibration interval (Int 3) 1 ... 7 ... 999 d
Temperature unit
Date/time
Resolution of pH display
Note
You can leave the configuration menu at any time. Parame-
ters that have already been changed are stored.
To do this, press the
Baud rate

Configuration

1 Switch off the instrument.
2 Press and hold down the
e
3 Press the
The display test appears briefly on the display.
The instrument then switches automatically to the
setting of the baud rate.
1200, 2400, 4800, 9600
OFF, 5 s, 10 s, 30 s, 1 min,
5 min, 10 min, 15 min, 30 min,
60 min
°C, °F
As required
0.01, 0.001
m
key.
m
key.
key.
Operation
117