Clearing The Storage - Inolab pH level 2 Instruction Manual

4.4.4 Clearing the storage

This function can erase the stored data records. 800 mem-
ory locations will then become available again.
Note
The Clear store function only appears if data records have
already been stored in the storage. Otherwise, the pH meter
automatically changes to the measuring mode.
In order to delete all the data records, proceed as follows:
1 Switch off the instrument.
2 Press and hold down the
e
3 Press the
The display test appears briefly on the display.
4 Confirm the clearing process by pressing
Pressing any other key stops the clearing process
and the data records remain in the storage.
Note
The calibration data remain in the storage and can be called
up via the calibration protocol.
s
key.
key.
Operation
g
.
111