Measuring The Redox Voltage - Inolab pH level 2 Instruction Manual

Note
The current AutoRead measurement (with acceptance of
the current value) can be terminated at any time by pressing
g
.

4.2.2 Measuring the Redox voltage

The instrument can measure the Redox voltage (mV) of a
solution when connected with a Redox electrode, e.g. Sen-
Tix ORP.
1 Perform the preparatory activities according to sec-
tion 4.2.
2 Immerse the Redox electrode into the test sample.
m
3 Press the
status line. The Redox voltage (mV) of the sample
appears on the display.
4 Wait for a stable measured value.
Note
Redox electrodes are not calibrated. However, you can
check Redox electrodes using a test solution.
key repeatedly until U appears in the
Operation
89