Operation
Outputting to the
display
108
4.4.3 Outputting the data storage
The contents of the data storage can be output to the:
l
display
l
interface
r
1 Press the
on the display.
g
2 Press the
A measured value appears on the display.
The memory location of the data store appears for
approx. 2 s. This is followed by the corresponding
temperature.
You can perform the following activities:
Display further parameters of the data record
(I.D. no., date, time, memory location)
Advance one data record (memory location)
Go back one data record (memory location)
key repeatedly until Sto disp appears
key.
g
Press
u
Press
d
Press