Transmitting Measured Values - Inolab pH level 2 Instruction Manual

Operation
90

4.2.3 Transmitting measured values

You can transmit measured values (data records) in 3 ways:
l
Switch on the data transmission (Int 2) (see page 112)
– After expiry of the selected interval, the current data
record is sent to the interface.
l
Switch on AutoStore (Int 1) (see page 106)
– After expiry of the selected interval, the current data
record is sent to the interface and in addition is stored
in the data storage of the instrument
– AutoStore (Int 1) covers the data transmission interval
(Int 2).
g
l
Press the key
This manually transmits the current measured values at
any time - independently of the selected intervals.
Note
If you connect a recorder (analog output), the output to the
digital output is switched off.