Adjusting An Adjustable Height Stand - HP EliteOne 800 G3 Hardware Reference Manual

2. Grasp both top and bottom of the computer and press down until the computer is in the desired position.

Adjusting an adjustable height stand

CAUTION: Use caution when rotating or reclining a computer if a cable lock is installed. The cable or the lock
may interfere with the rotation or the angle of recline.
This stand allows you to:
Tilt the computer from –5° to 20° from the desktop
●
Adjust the computer height within a range of 110 mm (4.3 in)
●
Rotate the computer from the landscape to portrait view
●
Swivel the computer up to 45° to either side
●
To tilt the computer, grasp the top and bottom of the computer and adjust to the appropriate tilt.
To change the height of the computer, grasp both sides of the computer and lift or lower to the appropriate
height.
To recline the computer:
Positioning the computer 15