Stands
Two stands are available for the computer:
Recline stand
●
●
Adjustable height stand
Recline stand
To remove the stand:
1.
Prepare the computer for disassembly (see
2.
Remove the rear port cover, if it is installed. For instructions, see
on page
3.
Press the release latch under the stand (1).
4.
Lift the stand up (2), and then pull the stand hooks out of the computer (3).
Adjustable height stand
To remove the stand:
1.
Prepare the computer for disassembly (see
2.
Remove the rear port cover, if it is installed. For instructions, see
on page
3.
Press the release latch under the stand (1).
18.
18.
Preparing to disassemble the computer on page
Removing the rear port cover
Preparing to disassemble the computer on page
Removing the rear port cover
18).
18).
Stands
19