Positioning The Computer; Adjusting The Height-Adjustable/Recline Stand (Optional) - HP EliteOne 800 Hardware Reference Manual

Positioning the computer

This computer may be shipped with no stand, with a height-adjustable stand, or a tilt/swivel stand.
The computer may be placed in the landscape position with the HP logo on the bottom bezel or it may
be placed in the portrait position with the HP logo on the right side, as you face the computer.
Figure 1-6
CAUTION:

Adjusting the height-adjustable/recline stand (optional)

This stand allows you to:
●
adjust the computer height 110 mm (4.3 inches)
●
rotate the computer position from landscape to portrait
●
recline the computer backward up to +60 degrees
●
tilt the computer to 30 degrees from the desktop
●
swivel the computer up to 360 degrees right or left
To rotate the computer:
1. Grasp the computer by the sides and lift it straight up (1) to its highest position.
Figure 1-7
2. Press the top of the computer backwards (2).
CAUTION:
3. Grasp the top right and bottom left of the computer and carefully turn it counterclockwise (3) until
it is in the portrait position (4).
Supported and unsupported positions
Positioning the computer with the HP logo on the top or on the left is not supported.
Rotating the computer with the height-adjustable/recline stand
The computer must be raised and tilted to provide clearance for rotating it.
Positioning the computer 7