Adjusting An Adjustable Height Stand - HP ProOne 600 Hardware Reference Manual
Hp proone 600 g4 21.5-inch all-in-one business pc
hp proone 400 g4 23.8-inch all-in-one business pc
hp proone 400 g4 20-inch all-in-one business pc
Hide thumbs
Also See for ProOne 600:
- Illustrated parts & service map (4 pages) ,
- Hardware reference manual (59 pages) ,
- Hardware reference manual (49 pages)
Table of Contents
Advertisement
Adjusting an adjustable height stand
CAUTION:
interfere with the angle of recline.
This stand allows you to:
Tilt the computer from –5° to 20° from the desktop
●
Adjust the computer height within a range of 110 mm (4.3 in)
●
Swivel the computer up to 45° to either side
●
To tilt the computer, grasp the top and bottom of the computer and adjust to the appropriate tilt.
To change the height of the computer, grasp both sides of the computer and lift or lower to the appropriate
height.
16
Chapter 2 Setup
Use caution when reclining a computer if a cable lock is installed. The cable or the lock may
Advertisement
Table of Contents
