Buttons And Selector Switches - Siemens SITOP SEL1200 Manual

Description, device design, dimension drawing

2.5 Buttons and selector switches

2.5 Buttons and selector switches
Figure 2-5
Buttons (ON/OFF/RST)
following two functions:
1. manually switching an output off and on (see the following).
2. resetting an output automatically switched off due to an overload condition (see Chapter
Electronic overload shutdown and reset (Page 18)).
Using selector switch COM
signaling the state of the output channels and the communication at the signaling contact.
COM = 0: Displays the status of the output channels
COM = 1: Internal device parameters are transferred via the signaling contact (diagnostics
interface)
Selector switches (TD1, TD2)
individual outputs (see Chapter Setting the switch-on delay time (Page 21)).
16
Buttons and selector switches
⑥
for the selectivity module SITOP SEL1200-1400 fulfill the
⑦
, at the message contact (13, 14)
⑧
can be used to select the delay time when switching on the
④
you can toggle between
SITOP SEL1200-1400
Manual, 06.2019, A5E46496083-1-76