Toyota verso User Manual page 250

2-3. Operating the lights and wipers
■
Turning on the low beam headlights when the vehicle is parked in dark
areas
■
Customization that can be configured at any authorized Toyota dealer
or repairer, or another duly qualified and equipped professional
Settings of the light sensor sensitivity can be changed.
(Customizable features →P. 602)
NOTICE
■
To prevent battery discharge
Do not leave the lights on longer than necessary when the engine is not run-
ning.
250
VERSO_WE_OM64574E
Turn off the engine with the light switch in
or off, and pull the light switch
toward you and release it. The low beam
headlights will turn on for about 30 sec-
onds to light up the area around the vehi-
cle.
The lights are turned off in the following
situations.
● Vehicles without smart entry & start
system:
The engine switch is turned to the "ON"
position.
●
Vehicles with smart entry & start sys-
tem:
The "ENGINE START STOP" switch is
turned to IGNITION ON mode.
●
The light switch is turned on.
● The light switch is pulled toward you
and then released.