Initializing the tire pressure warning system (if equipped)
■
The tire pressure warning system must be initialized in the fol-
lowing circumstances:
● When rotating front and rear tires which have different tire infla-
tion pressures
● When the tire inflation pressure is changed such as when
changing traveling speed
● When changing the tire size
When the tire pressure warning system is initialized, the current
tire inflation pressure is set as the benchmark pressure.
■
How to initialize the tire pressure warning system (if
equipped)
Park the vehicle in a safe place and turn the engine switch to
the "LOCK" position (vehicles without smart entry & start sys-
tem) or the "ENGINE START STOP" switch off (vehicles with
smart entry & start system).
Initialization cannot be performed while the vehicle is moving.
Adjust the tire inflation pressure to the specified cold tire infla-
tion pressure level. (→P. 595)
Make sure to adjust the tire pressure to the specified cold tire infla-
tion pressure level. The tire pressure warning system will operate
based on this pressure level.
Turn the engine switch to the "ON" position (vehicles without
smart entry & start system) or the "ENGINE START STOP"
switch to IGNITION ON mode (vehicles with smart entry &
start system).
VERSO_WE_OM64574E
4-3. Do-it-yourself maintenance
4
433