Jam Protection Function - Toyota verso User Manual

■
The power windows can be operated when
Vehicles without smart entry & start system
The engine switch is in the "ON" position.
Vehicles with smart entry & start system
The "ENGINE START STOP" switch is in IGNITION ON mode.
■
Operating the power windows after turning the engine off
Vehicles without smart entry & start system
The power windows can be operated for approximately 45 seconds even
after the engine switch is turned to the "ACC" or "LOCK" position. They
cannot, however, be operated once either front door is opened.
Vehicles with smart entry & start system
The power windows can be operated for approximately 45 seconds even
after the "ENGINE START STOP" switch is turned to ACCESSORY mode
or turned off. They cannot, however, be operated once either front door is
opened.
■

Jam protection function

If an object becomes caught between the window and the window frame,
window travel is stopped and the window is opened slightly.
■
When the power window does not close normally
If the jam protection function is operating abnormally and a window cannot
be closed, perform the following operations using the power window switch
on the relevant door.
● After stopping the vehicle, the window can be closed by holding the
power window switch in the one-touch closing position while the engine
switch is turned to the "ON" position (vehicles without smart entry & start
system) or the "ENGINE START STOP" switch is turned to IGNITION ON
mode (vehicles with smart entry & start system).
VERSO_WE_OM64574E
1-4. Opening and closing the windows and panoramic roof shade
1
113