Setting And Canceling The Functions - Toyota verso User Manual

■

Setting and canceling the functions

Vehicles without Navigation/Multimedia system
To switch between setting and canceling, follow the procedure
below:
Vehicles without smart entry & start system: Close all the
doors and turn the engine switch to the "ON" position. (Per-
form
Vehicles with smart entry & start system: Close all the doors
and turn the "ENGINE START STOP" switch to IGNITION ON
mode. (Perform
Shift position linked door
locking function
Shift position linked door
unlocking function
Speed linked door locking
function
Driver's door linked door
unlocking function
*
:Vehicles with a Multidrive
VERSO_WE_OM64574E
within 10 seconds.)
within 10 seconds.)
Function
*
*
1-2. Opening, closing and locking the doors
Shift the shift lever to "P" or "N",
press and hold the door lock
or
switch ( ) for about 5
seconds then release.
The shift lever and switch posi-
tions corresponding
desired function to be set are
shown as follows.
Use the same procedure to can-
cel the function.
Shift lever Door lock switch
position position
"P"
"N"
1
to the
77