Intrusion Sensor (If Equipped); Deactivating Or Stopping The Alarm; Canceling The Intrusion Sensor; Intrusion Sensor Cancel Switch ∗ P - Toyota verso User Manual

1-6. Theft deterrent system
■

Deactivating or stopping the alarm

Do one of the following to deactivate or stop the alarm.
● Unlock the doors using the entry function (vehicles with smart
entry & start system) or wireless remote control.
● Start the engine. (The alarm will be deactivated or stopped
after a few seconds.)

Intrusion sensor (if equipped)

The intrusion sensor detects an intruder or movement in the vehicle.
The intrusion sensor can be canceled using the cancel switch.
This system is designed to deter and prevent vehicle theft but does
not guarantee absolute security against all intrusions.
■

Canceling the intrusion sensor

To cancel the intrusion sensor, perform the necessary procedure
each time canceling the sensor is desired.
138
VERSO_WE_OM64574E
Vehicles without smart entry &
start system: Turn the engine
switch to the "LOCK" position
and press the intrusion sensor
cancel switch.
Vehicles with smart entry & start
system: Turn the
START STOP" switch off and
press the intrusion sensor cancel
switch.
Pressing the switch again will re-
enable the intrusion sensor.
"ENGINE