Shutdown - HP VSR1000 Layer 2 - Wan Access Command Reference

Usage guidelines
Before sampling network traffic within a specific period of time on an interface, you must clear the
existing statistics.
If neither dialer nor interface-number is specified, this command clears the statistics of all the interfaces.
If only dialer is specified, this command clears the statistics of all dialer interfaces.
If both dialer and interface-number are specified, this command clears the statistics of the specified
dialer interface.
Examples
# Clear the statistics of Dialer 1.
<Sysname> reset counters interface dialer 1
Related commands
display interface dialer

shutdown

Use shutdown to shut down a dialer interface.
Use undo shutdown to bring up a dialer interface.
Syntax
shutdown
undo shutdown
Default
A dialer interface is up.
Views
Dialer interface view
Predefined user roles
network-admin
Examples
# Shut down interface Dialer 1.
<Sysname> system-view
[Sysname] interface dialer 1
[Sysname-Dialer1] shutdown
42