Ams Wireless Configurator; Setup - Emerson 1410 Reference Manual

Wireless gateway
Hide thumbs Also See for 1410:
Table of Contents

Advertisement

Reference Manual
00809-0200-4410, Rev BC
4.5

AMS Wireless Configurator

AMS Wireless Configurator helps deploy and configure wireless field devices. It provides an integrated
operating environment that leverages the full capabilities of WirelessHART
trending, charting, and graphical display capabilities provided by enhanced EDDL technology.
Display and modify device configuration
View device diagnostics
View process variables
Provision a wireless device using the drag-and-drop operation so it can join a Gateway's self-organizing
network
Enhance AMS Wireless Configurator functionality with the AMS Wireless SNAP-ON Application
Restrict access to AMS Wireless Configurator functions through the use of security permissions
See the release notes for information specific to the current release of AMS Wireless Configurator. To
display the release notes, select START>PROGRAMS>AMS WIRELESS CONFIGURATOR>HELP.
4.5.1

Setup

AMS Wireless Configurator supports connectivity to a Wireless Network and a HART Modem. Both of
these interfaces must be configured through the Network Configuration application. To run this
application, select START>PROGRAMS>AMS DEVICE MANAGER>NETWORK CONFIGURATION.
Note
Do not have the Security Setup Utility running at the same time as the Network Configuration
application or else a configuration error might occur.
Use the following procedure to configure a wireless network for AMS Wireless Configurator:
1. Open the Network Configuration application.
2. Select Add...
3. Select Wireless Network and select Install...
4. Select Next.
5. Enter a name for the wireless network and select Next.
6. Enter the HostName or IP Address for the Gateway and select Add.
7. Repeat
8. Check the box to Enable Secure Communications with the Wireless Gateway.
9. Select Finish to close the configuration window.
10. Select Close to exit the Network Configuration application.
Software Setup
Step 6
if multiple Gateways need to be added.
Software Setup
July 2017
®
, including embedded data
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents