Reference Manual
00809-0200-4410, Rev BC
Table 5-2. Predefined Modbus Registers
Description
SYSTEM_DIAG.TEST_UNSIGNED_SHORT
SYSTEM_DIAG.TEST_INT
SYSTEM_DIAG.TEST_UNSIGNED_INT
SYSTEM_DIAG.TEST_FLOAT
5.5
EtherNet/IP
Communication settings
It is important that the EtherNet/IP communication settings in the Gateway match the setting in the
EtherNet/IP master or client. Refer to the host system documentation for more information on how to
configure these settings, or to the Emerson Wireless
EtherNet/IP communication settings can be found by navigating to System Settings>Protocols>Ethernet/IP.
Note
EtherNet/IP can be integrated with any approved EtherNet/IP ODVA member. Other protocols such as
HART-IP
for ordering options.
Host Integration
™
are still functional within the Gateway. Refer to Emerson Wireless Gateway
Register
Data type
49035
16-bit unsigned int
49036
32-bit int
49038
32-bit unsigned int
49040
32-bit float
Integration Manual
for the EtherNet/IP. The
Host Integration
July 2017
Product Data Sheet
35