Table of Contents
Advertisement
Model W1849 (For Machines Mfd. Since 11/16)
Test.Run
Once assembly is complete, test run the machine to
ensure it is properly connected to power and safety
components are functioning properly.
If you find an unusual problem during the test run,
immediately stop the machine, disconnect it from power,
and fix the problem BEFORE operating the machine again.
The Troubleshooting table in the SERVICE section of this
manual can help.
To test run machine, do these steps:
1. Clear all setup tools away from machine.
2. Connect machine to power supply.
3. Turn machine ON (see Figure 36) and verify motor
operation. Motor should run smoothly and without
unusual noises.
4. Turn machine OFF by pressing in STOP paddle. Motor
should turn off immediately.
— If machine does stop, the STOP paddle is working
as designed.
— If machine does not stop, immediately disconnect
power to the machine. The STOP paddle is not
working correctly. This safety feature must
work properly before proceeding with regular
operations. Call Tech Support for help.
Serious. injury. or. death. can. result.
from. using. this. machine. BEFORE.
understanding. its. controls. and. related.
safety.information..DO.NOT.operate,.or.
allow.others.to.operate,.machine.until.
the.information.is.understood..
DO. NOT. start. machine. until. all.
preceding.setup.instructions.have.been.
performed..Operating.an.improperly.set.
up. machine. may. result. in. malfunction.
or. unexpected. results. that. can. lead.
to. serious. injury,. death,. or. machine/
property.damage.
Figure 36. Location of ON/OFF switch.
-29-
ON Button
STOP Paddle/
OFF Switch
Advertisement
Table of Contents
