Shop fox W1849 Owner's Manual page 27

Model W1849 (For Machines Mfd. Since 11/16)
13. Mount fence to fence base guide, sliding T-channel
around fence base guide plate (see Figure 29).
— For normal workpieces or resawing, mount fence
in vertical position, as shown in Figure 29, then
rotate fence base lock lever to secure.
— For thin workpieces, mount fence in horizontal
position, as shown in Figure 30, then rotate fence
base lock lever to secure.
T-Channel
Fence Lock
Lever
Figure 29. Installing fence in vertical
T-Channel
Fence Lock
Lever
Figure 30. Fence installed in horizontal
-25-
Fence
Fence Base Guide
position.
Fence
position.