Table of Contents
Advertisement
10. Thread (1) M8-1.25 hex nut onto lock lever, install
lock lever onto fence base, then tighten hex nut to
secure (see Figure 26).
11. Install adjustable handle onto fence base with (1)
8mm flat washer, and thread into fence base guide
plate (see Figure 27).
12. Place fence base guide on fence rail with lock lever
raised up. Push lock lever down to secure fence in
place (see Figure 28).
Model W1849 (For Machines Mfd. Since 11/16)
Lock
Lever
Hex Nut
M8-1.25
Figure 26. Fence base lock lever installed.
Flat Washer
Adjustable
Handle
Figure 27. Fence base adjustable handle
and guide plate installed.
Rail
Figure 28. Fence base installed on fence
-24-
Fence
Base
Fence Base
Guide Plate
Fence Base Guide
Lock Lever in
Down (Locked)
Position
rail.
Advertisement
Table of Contents
