Acft Configuration Page - Garmin G3X Touch Installation Manual

33.4.9

ACFT Configuration Page

The Aircraft Configuration Page allows setting the parameters for Reference Speeds and Flight Planning.
The aircraft identifier and map symbol can also be entered on this page.
Reference Speeds–The aircraft Vspeeds can be entered using the FMS Joystick. A label can be added to
the Custom (1-4) reference speed fields. The entered label text will be displayed on the airspeed tape (in
normal mode) at the entered speed. If no text is entered for the label, a small triangle will appear instead.
To clear a reference field:
1. Highlight the desired reference speed field.
2. Press the CLR key, or set the speed to 0.
To clear a label field:
1. Highlight the desired label field.
2. Press the CLR key.
The aircraft's maximum speed limit can be configured in three different ways. All aircraft have a
maximum indicated airspeed limit (VNE) which is configured using the VNE (IAS) field. This airspeed is
marked on the PFD airspeed tape with a red line, and does not change with altitude. In this example, the
value for VNE has been entered as 205 knots indicated airspeed. The aircraft is below the never-exceed
speed any time its indicated airspeed is below 205 knots.
190-01115-01 G3X/G3X Touch Installation Manual - GDU 37X Config and Post Install Checkout
Rev. AC Page 33-95