Additional Equipment Required; Contents Of Gad 29 Connector Kit; Equipment Available; General Specifications - Garmin G3X Touch Installation Manual

4.2 Equipment Available

4.2.1 Required Equipment
Model
GAD 29
4.2.2

Additional Equipment Required

The connector kit in Table 4-2 is required to install the unit, it is not provided with the GAD 29 unit.
Table 4-2 Contents of GAD 29 Connector Kit (011-03271-00)
Backshell w/Hdw, Jackscrew, 9 Pin
Backshell w/Hdw, Jackscrew, 25 Pin
Conn, Plug,D-Sub, Crimp Pin, Commercial, 25 CKT
Conn, Rcpt, D-Sub, Crimp Socket, Commercial, 09 CKT
Contact, Socket, Military Crimp, Size 20
Contact ,Pin, Military Crimp, Size 20

4.3 General Specifications

See Section 2.2 for power/current specifications, and

4.4 Mounting Requirements

The GAD 29 will mount remotely. The GAD 29 will be secured to the airframe using four screws supplied
by the installer. Refer to

4.5 Unit Installation

Fabrication of a wiring harness is required. Sound mechanical and electrical methods and practices are
recommended for installation of the GAD 29. Refer to
Section 25.1 for pinouts.
1. Mount the unit to a suitable mounting location using (4) #10-32 pan or hex head screws.
2. Assemble the connector backshells and wiring harness.
3. Connect CAN terminator to unit if required
4. Connect backshell connectors.
190-01115-01
Rev. AC
Table 4-1 GAD 29 Part Numbers
Assembly Part
Number
010-01172-00
Item
Section 4.6 for outline and installation drawings.
G3X/G3X Touch Installation Manual - GAD 29 Installation
Garmin P/N
011-01855-00
011-01855-02
330-00624-25
330-00625-09
336-00022-02
336-00024-00
Section 2.4.1 for dimension/weight specifications.
Section 2.3 for wiring considerations, and to
(Section 2.3.1.3.3).
Unit Only Part
Number
011-03236-00
Quantity
1
1
1
1
11
27
Page 4-2