Garmin G3X Touch Installation Manual page 660

Stall Warning AOA Calibration
This procedure sets the AOA value for the top of the red "chevron" section of the AOA gauge
(Figure 34-12), which is also the AOA value at which the audible stall warning sound will play
continuously (just before stall break is suggested).
1. Use the Touch Panel or a Move Selector Knob to select the Calibrated Stall Warning AOA
calibration field, then press the Calibrate button .
2. Follow the onscreen instructions, then press the Start button to begin the calibration.
3. Press the Done button when in compliance with the onscreen instructions.
190-01115-01 G3X/G3X Touch Install Manual - GDU 4XX Config and Post Install Checkout
Rev. AC
Stall Warning
AOA (Indicator
Flashes and Audio
Tone Sounds
Continuously)
Figure 34-12 Stall Warning AOA
Page 34-42