Engine/Airframe Sensor Installation; Engine/Airframe Sensor Options; Compatible Engine/Airframe Input Sensors; Section 23 Engine/Airframe Sensor Installation - Garmin G3X Touch Installation Manual

23 ENGINE/AIRFRAME SENSOR INSTALLATION

23.1 Engine/Airframe Sensor Options

Table 23-1 lists the types of engine/airframe sensors that may be used for the various engine/airframe
inputs. Many of these sensors are included in the Garmin G3X Sensor Kits
sensors must be correctly installed and configured
Section 34.4.26 for GDU 4XX systems) prior to use.
NOTE
In addition to the engine sensors listed in Table 23-1, the G3X system can also work with
many other sensors (not listed) that output a compatible signal, refer to the sensor
specifications to determine compatibility.
Table 23-1 Compatible Engine/Airframe Input Sensors
SENSOR TYPE
10-29 Vdc input
Amploc KEY100 Hall
effect sensor
Bus Voltage
UMA 1C4 shunt
Other ammeter shunt or
Hall effect sensor types
Rotax 965531
Rotax 966385
50-150C Thermistor
Carburetor
(e.g. VDO 320-XXX
Temperature
series)
UMA 1B10R RTD
Kavlico P4055-50G-E4A
Coolant Pressure
Any voltage-output
pressure transducer
Custom Analog Any voltage-output
Parameter sensor
*Items with a Garmin part number may be included in a G3X Sensor Kit
available individually from Garmin Dealers
190-01115-01
Rev. AC
COMPATIBLE
SENSORS
G3X/G3X Touch Installation Manual - Engine/Airframe Sensor Installation
(Section 33.4.19 for GDU 37X systems and
GARMIN PART
NUMBER*
N/A
N/A +/- 100 A
909-D0000-00 +/- 100 A
Uses custom user-defined
N/A
calibration (millivolts to amps)
N/A
N/A
N/A
UMA temperature sensors without
494-70005-00 the "R" designation are not
compatible
494-30004-02 0-50 psiG
Uses custom user-defined
N/A
calibration (voltage to pressure)
Uses custom user-defined sensor
N/A
calibration
(Section 23.2). Each of the
NOTES
(Section 23.2), and are
Page 23-1