Display Options Window - Garmin G3X Touch Installation Manual

33.4.12.2 Display Options Window (press the Options softkey):
EIS Display Location–Controls which GDU the EIS Display (Engine Bar) appears on in a multi-screen
system.
Auto–In a single-display system (or in a reversionary condition) the EIS Display appears on the PFD;
in a two or three display system the EIS Display appears on the MFD.
PFD–The EIS Display will always appear on the PFD, even in a multi-display system.
PFD1 Layout–Controls the screen layout for PFD1.
Auto–PFD1 is a dedicated full-screen PFD display (when in a multi-display system and not in
reversionary mode).
Split Screen–PFD1 always remains in split-screen mode.
User Selected-(default setting) Allows changing PFD1 layout in normal mode from the Display Setup
page in the main menu.
PFD2 Layout–Controls the screen layout for PFD2 (for 3-display systems only).
Auto–PFD2 is a dedicated full-screen PFD display (when not in reversionary mode).
Split Screen–PFD2 always remains in split-screen mode.
Full PFD/MFD–PFD2 displays a page sequence that includes a full-screen PFD display as well as
full-screen MFD pages.
User Selected–(default setting) Allows changing PFD2 Layout in normal mode from the Display
Setup page in the main menu.
PFD Auto Declutter - Determines whether non-essential information will be removed from the PFD
display when the aircraft is in an unusual attitude. Set to "Disable" to retain all information on the PFD
during aerobatic maneuvers.
190-01115-01 G3X/G3X Touch Installation Manual - GDU 37X Config and Post Install Checkout
Rev. AC Page 33-103