Garmin G3X Touch Installation Manual page 634

Hide thumbs Also See for G3X Touch:

Table of Contents

5. Ensure that the aircraft has been properly positioned per the on-screen instructions, then press the

Start button to begin the test.

6. Gradually increase power from idle to full throttle and back to idle over the course of 1-2 minutes,

the test data is displayed as the test progresses.

If failures are indicated, the engine run-up test may be repeated up to three times. If the test

does not pass after three attempts, the installation should be considered unreliable until the

source of the vibration problem is identified and remedied. If the engine run-up test fails

repeatedly, record the values that are reported to be out of range for future reference.

190-01115-01

G3X/G3X Touch Install Manual - GDU 4XX Config and Post Install Checkout

Troubleshooting