Garmin G3X Touch Installation Manual page 590

Refer to Section 33.2 for configuration mode instructions, then follow the below steps to make changes to
the Engine/Airframe Input Configuration.
1. In configuration mode, use the FMS Joystick to select the Engine/Airframe Input Configuration
Page.
2. Use the FMS Joystick to select the desired configurable item and make the desired change(s)
(Section 33.4.19, including
3. Press the Save softkey to store settings or press the Cancel softkey to cancel changes and return to
the Engine Configuration Page.
4. Press the FMS Joystick to move the cursor to the page selection menu when finished.
190-01115-01 G3X/G3X Touch Installation Manual - GDU 37X Config and Post Install Checkout
Rev. AC
33.4.19.3.1 - 33.4.19.4.).
Page 33-120