Non-Structural Installation To Airframe; Example Teardrop Antenna Installation In Airframe Under Fabric Skin; Example Arinc 743 Footprint In Airframe Under Fabric Skin - Garmin G3X Touch Installation Manual

22.6.3 Non-structural Installation to Airframe

Internal Non-structural Installation
Figure 22-28 and Figure 22-29 show examples of under the fabric skin non-structural mounting of the
antenna to the airframe of a tube-and-fabric aircraft.
In Figure 22-28, a bracket is made to attach to the airframe, just under the fabric for a teardrop antenna
installation. The doubler plate and mounting hardware described in the generic installation (Section
22.6.1) are used with the bracket as the antenna mounting surface. In Figure 22-29, a similar case is shown
using the generic installation of the ARINC 743 footprint antenna. The doubler plate is optional for this
type of installation with either the Teardrop or the ARINC 743 antenna.
Figure 22-28 Example Teardrop Antenna Installation In Airframe Under Fabric Skin
Figure 22-29 Example ARINC 743 Footprint In Airframe Under Fabric Skin
190-01115-01 G3X/G3X Touch Installation Manual - GPS/XM Antenna Installation
Rev. AC Page 22-28