3.31
Lightning System Option Configuration Load Confirmation
Coordinate the StormScope configuration with Section 7.15 " Functional Check".
1. With PFD1 in configuration mode, use the PFD1 large FMS knob to select OTHER and the
Stormscope configuration page.
2. Activate the cursor to highlight the DATA field. Use the small FMS knob to open the drop down
menu then select 'Config' and press ENT key on the PFD1.
G1000 / GFC 700 System Maintenance Manual - 300/B300 Series King Air
190-00716-01
Figure 3-20, Stormscope Configuration Page
Figure 3-21, Stormscope Configuration
Page 3-47
Revision 4