Saddle Stitch Unit - Toshiba e-STUDIO5506AC Hardware Troubleshooting Manual

1.TROUBLESHOOTING FOR THE HARDWARE
5 Fit the staple cartridge into the stapler.
When fitting the staple cartridge, hold the green-labeled portion of the bracket securely so that the bracket will
not move.
Insert the cartridge until it is caught by the latch and fixed with a click.
Close the front cover of the finisher.
6
If the message "Check staple cartridge" remains, repeat the procedure above from steps 1 to 6.
 Saddle Stitch unit
Open the front cover of the finisher, and pull out the Saddle Stitch unit until it stops.
1
Remove the staple cartridges.
2
Replace both cartridges at a time.
1
2
Press the buttons on both sides of the cartridge.
3
The transparent cover of the cartridge is lifted.
66 Refilling With Staples
1
2