Clearing A Staple Jam; Finisher - Toshiba e-STUDIO5506AC Hardware Troubleshooting Manual

Clearing a Staple Jam

0.
When a staple jam has occurred in the stapler of the finisher or saddle stitch unit, clear the jam following the
procedure below.
 P.51 "Finisher"
 P.53 "Saddle Stitch unit"
Do not touch the connectors inside the equipment. This could cause a malfunction.
 Finisher
1 Open the front cover of the finisher.
Remove the staple cartridge.
2
Lower the guide while holding the knob.
3
Do not touch the stapling area.
The actual needle point could cause you personal injury.

Clearing a Staple Jam 51