Check Staple Cartridge In The Saddle Stitch Unit - Toshiba e-Studio 281c Operator's Manual

2. "Check staple cartridge in the Saddle Stitch Unit"

This message will be shown only if the Saddle Stitch Finisher (optional: MJ-1024) is installed. When the
staples in the stapler of the Saddle Stitch Finisher run out, this message appears.
Replace the staple cartridge according to the following procedure.
1 Open the front cover of the finisher.
Slide the Saddle Stitch Unit carefully
2
toward the front.
10
3 Pull the handle of the stapler of the Sad-
dle Stitch Unit toward you to unlock it.
Then turn the stapler clockwise for about
60 degrees.
• The stapler will be locked and will not be turned any further
when it becomes almost horizontal.
300
10.WHEN THIS MESSAGE APPEARS
2
1