Saddle Stitch Unit (Optional) - Toshiba e-STUDIO5506AC Hardware Troubleshooting Manual

1.TROUBLESHOOTING FOR THE HARDWARE
9 Close the Hole Punch Unit cover when it is installed.
10 Close the front cover first, and connect the finisher to the equipment.
Move the finisher slowly placing your hands on the positions shown in the figure.
Be careful not to let your fingers be caught between the finisher and the equipment.
This could injure you.
 Saddle stitch unit (optional)
The Saddle Stitch unit is inside the Saddle Stitch Finisher MJ-1112.
Remove the misfed paper from the exit side of the Saddle Stitch unit.
1
36 Clearing a Paper Misfeed