Xerox Phaser 3330 System Administrator Manual page 53

Enabling and Configuring 802.1X at the Control Panel
1. At the printer control panel, press the Menu button.
Navigate to Tools, then press OK.
2.
Note: To access this feature at the control panel, log in as an administrator.
3. Navigate to Setup, then press OK.
4. Navigate to Network Settings, then press OK.
Navigate to Network Services, then press OK.
5.
6. Navigate to 802.1X, then press OK.
Navigate to On, then press OK.
7.
8. Navigate to the Authentication Method used on your network, then press OK.
Notes:
• When the printer is in FIPS 140 mode, EAP-TLS authentication is required.
• To configure 802.1X settings for EAP-TLS, use Xerox
9. Using the alphanumeric keypad, enter the username, then press OK.
10. Using the alphanumeric keypad, enter the password, then press OK.
11. To return to the Ready screen, press the Menu button.
® CentreWare ® Internet Services.
Xerox Phaser
®
System Administrator Guide
Security
3330 Printer 53
®