Xerox Phaser 3330 System Administrator Manual page 41

− Name (SSID)
− Security Options (Encryption Type)
− Passphrase
Note: The network name and passphrase are case sensitive.
Configuring the Printer for Wireless LAN WPA-Enterprise
1. In Xerox ® CentreWare
2. Click Wireless Setup.
Click Edit Settings.
3.
4. For Network Name SSID, select an option.
To refresh the list of available networks, click Refresh.
5.
6. For Security Type, select WPA/WPA2-Enterprise.
7. For 802.1x Authentication, select an authentication protocol.
If you select EAP-TTLS, select an Inner Authentication Protocol, then type an Identity Name,
−
User Name, and User Password.
If you select PEAP, type a User Name and Password.
−
8. For Root Certificate Setup, upload a Root Certificate.
9. For Client Certificate Setup, upload a Client Certificate, then enter the Private Key Password.
10. For Address Acquisition, select a protocol option.
11. Click Apply.
Configuring the Printer for Open System
1. In Xerox ® CentreWare
2. Click Wireless Setup.
3. Click Edit Settings.
4. For Network Name SSID, select an option.
5. To refresh the list of available networks, click Refresh.
For Security Type, select Open System.
6.
7. For Encryption Type, select an option.
8. For Security Key or Passphrase, type the passphrase.
9. For Address Acquisition, select a protocol option.
10. Click Apply.
® Internet Services, click Properties > Connectivity > Protocols.
Internet Services, click Properties > Connectivity > Protocols.
®
Network Connectivity
Xerox Phaser 3330 Printer
® ®
System Administrator Guide
41