Updating The Printer Software; Determining The Printer Software Version; Enabling Upgrades; Updating The Software Using A Usb Flash Drive - Xerox Phaser 3330 System Administrator Manual

Updating the Printer Software

You can update your printer when Xerox releases a new version of printer software or firmware.
Before you begin:
• Determine the current software version of your printer.
• Download the latest software update. From the Xerox Support website at
www.xerox.com/office/3330support, select the .hd file.

Determining the Printer Software Version

1. In Xerox ® CentreWare
To verify the software installed on your printer, scroll down to Software Versions.
2.

Enabling Upgrades

1. In Xerox ® CentreWare
2. Click Upgrade Management.
For Software Upgrade, select Enabled.
3.

Updating the Software Using a USB Flash Drive

1. Copy the software .dlm file to your USB Flash drive.
2. Insert your USB Flash drive in a USB port on the printer.
3. Navigate to Print from USB, then press OK.
Select the file, then touch OK.
4.
5. When the process completes, the printer restarts automatically.
6. To verify that the software has updated, check the configuration report.
Installing Software Upgrades in Xerox
To install software upgrades in Xerox
1. In Xerox ® CentreWare
2. Click Firmware Upgrade.
To locate and select the firmware upgrade file in .dlm format, click Browse or Choose File.
3.
4. Click Open.
Click Install Software.
5.
6. To verify that the software has updated, check the configuration report.
Note: Software installation begins several minutes after you submit the software to the printer.
Xerox ® CentreWare
® Internet Services, click Properties > General Setup > Configuration.
Internet Services, click Properties > Maintenance.
®
® CentreWare
® Internet Services, click Properties > Maintenance.
® Internet Services is unavailable while the software is installing.
CentreWare Internet Services
® ®
® Internet Services:
Xerox
System Administrator Guide
Administrator Tools
Phaser 3330 Printer
® ®
91