Caring For Your Machine - Siruba HSM-2517 Instructions Manual

CARING FOR YOUR MACHINE

(1)
(2)
A
Face cover
Screw
(3)
(4)
(3)
A
1 2
Light bulb
To ensure the best possible operation of your
machine, it is necessary to keep the essential
parts clean at all times.
Always disconnect the machine from power
supply by removing the plug from the socket-
outlet.
Cleaning the feed dogs and hook area
1.Raise the needle to its highest position.
2.Remove the needle plate (1).
3.Remove the bobbin case (2).
4.Clean the feed dogs and hook area with the
lint brush.
NOTE: Put drop of sewing machine oil on
the hook race as indicated by the
arrows A.
5.Replace the bobbin case with the projection
(3)positioned against the spring (4). Replace
the needle plate.
Changing light bulb
1.Remove the face cover. Push up the bulb
slightly and turn clockwise.
2.Insert new bulb, punsh up and turn
counterclockwise. Replace the face cover.
Disconnect the machine from power supply
before changing a bulb. Do not use a bulb of
more that 15 watts.
-22-