Corded Buttonholes - Siruba HSM-2517 Instructions Manual

BUTTONHOLES
Spur
Spur
Less density
1
0
More density
1
1
2
2~4
3
3
4
2~4
Carefully mark the buttonhole length on your
garment. Place the fabric with the buttonhole
marked under the buttonhole foot. Slide the
foot forward so that the needle pierces the
fabric at the beginning of the buttonhole.

CORDED BUTTONHOLES

Hook filler cord (crochet thread or buttonhole twist) to the spur
and pull both ends of the cord forward under the foot.
Sew buttonhole so that zigzag stitches cover the cord.
When completed, release the cord from foot, pull ends of cord
forward and snip off extra lengrh.
ADJUSTING STITCH LENGTH (DENSITY)
AND WIDTH
You can also change stitch density to your
preference, within the buttonhole zone marked
on stitch length dial.
Narrow buttonholes may be sewn by adjusting
the stitch width dial.
1 2
PROCEDURE
1.Sitich forward to the end of buttonhole mark.
Stop sewing at the left stitch and raise needle.
2.Bartack 4 or 5 stitches.Stop sewing at the left stitch and
raise needle to its highest position.
3.Stitch backword to the start of buttonhole mark to
complete buttonhole.
4.Bartack 4 or 5 stitches. Stop sewing at the right
stitch and raise needle.
-21-