Tilting The Display; Setting The Video Mode; Setting The Refresh Rate; Minimizing Power Consumption - HP D5063H - Pavilion F50 - 15" LCD Monitor User Manual

Tilting the Display

The monitor has a tilt feature that allows you to tilt
the display back and forth as well as left and right to
find the most comfortable viewing position. To tilt
the display, grasp the sides and push the display
back or pull it toward you, or turn it left or right until
it is in the desired position. The display can be tilted
20º backward and 5º forward.
NOTE: Do not tilt the display by grasping the
top edge.

Setting the Video Mode

Since the display resolution of this monitor is 1024
pixels by 768 lines, the display will perform best
when your PC is set to a screen resolution of 1024 x
768. If you use a lower resolution (such as 640 x 480),
the image is expanded to fill the screen.
Your display supports many common video modes,
as shown in "Video Modes" on page 19. Check the
documentation supplied with your PC and video
adapter card to find out which modes they support.
To see what the video mode is on your PC, check the
settings for the Display Properties in the Windows
Control Panel of your PC.

Setting the Refresh Rate

The image refresh rate is the number of times per
second that the image is refreshed; it is also known as
the vertical frequency.
Your LCD Monitor is flick-free at all supported
refresh rates.
Although your LCD monitor supports up to 75 Hz
for analog video input, we recommend that you use
60 Hz refresh rate for best performance. The table in
"Video Modes" on page 19 shows the image refresh
rates supported by the display at different screen
resolution.
To set the refresh rate with a standard Windows
installation, follow the steps mentioned in your
Windows or video card documentation.

Minimizing Power Consumption

Many PCs support industry standard power-save
signaling techniques. Power management features
reduce the display's power consumption after a
period of keyboard or mouse inactivity.
When the monitor is in a power-saving mode, the
screen is blank and the power indicator is amber.
Pressing a key on the keyboard or moving the mouse
restores the image in several seconds. Consult your
PC documentation for information about setting the
power-saving modes.
The display accepts the signals for standard power-
saving mode, and when the PC goes into power
saving mode then the display also goes into power
saving.
7
user's guide