Advantech AIMB-240 Startup Manual

AIMB-240
Startup
Manual
Installation Note
Signal
F_PWRBTN#
*
Power button pin is located in Pin 11&12 of front panel connector.
Retention
Retention module can be found in the cooler box.
align with the mark on PCB
Packing List
Before you begin installing your single board, please
make sure that the following materials have been
shipped:
1 x AIMB-240 Mini ITX Motherboard
1 x CD-ROM or DVD-ROM contains the followings:
1 x IDE HDD cable (40-pin, pitch 2.54mm)
1 x IDE HDD cable (44-pin, pitch 2 mm)
1 x FDD cable (34-pin, pitch 2.54mm)
1 x Serial port cable with DB9P(M)
1 x Secondary port cable 14P FLAT to DB9P(M)
1 x I/O shield
1 x Startup Manual
1 x Rear I/O bracket
1 x Warranty card
CPU cooler is not included in packing list. Please note
that AIMB-240
accommodate Intel Pentium 4/Celeron socket 478
processor.
cooler.
PIN PIN
11 12
User's Manual (this manual in PDF file)
Drivers
uses socket
Please only use Advantech's certified CPU
Signal
PWRBTN
Please install the retention module correctly to
479 connector to