Chapter 5 System Setup; Introduction - Advantech DSA-3400 User Manual

Network digital signage platform
Table of Contents

Advertisement

Chapter 5 System Setup

5.1 Introduction

The system has an onboard Intel 852GME chipset for its graphic controller. It supports
conventional analog CRT monitors and LCD displays with 64MB frame buffer shared with
system memory. The VGA controller can drive CRT displays with resolutions up to 1600
x1200@85 Hz and 2048 x 1536 @ 75 Hz.
5.1.1 CMOS setting for panel type
The DSA-3400 system BIOS and custom drivers are located in a Flash ROM device,
designated U26 of system motherboard of DSA-3400. A single Flash chip holds the system
BIOS, VGA BIOS and network Boot ROM image. The display can be configured via CMOS
settings. This method Choice of "Boot display" selection items of Advanced Chipset Features
sections of Award BIOS Setup.
Figure 5.1: Advanced Chipset features screen
5.1.2 Display type
The DSA-3400 can be set only in a VBIOS Default, CRT and TV mode. The system is initially
set to "VBIOS Default".
5.1.3 Disable of Dual Independent Display
- 53 -

Advertisement

Table of Contents
loading

Table of Contents