Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Advantech DS-862 Series
Summary of Contents for Advantech DS-862 Series
- Page 1 DS-862 Series Digital Signage Player Supporting 4 Independent Displays...
- Page 2 The documentation and the software included with this product are copyrighted 2014 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice.
- Page 3 CHRONTEL is a trademark of Chrontel Inc. All other product names or trademarks are properties of their respective owners. For more information about this and other Advantech products, please visit our web-site at: http://www.advantech.com/ For technical support and service, please visit our support website at: http://support.advantech.com.tw/support/...
- Page 4 Product Warranty (24 months) Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation.
-
Page 5: Declaration Of Conformity
Declaration of Conformity FCC Class B – Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. -
Page 6: Technical Support And Assistance
Technical Support and Assistance Visit the Advantech website at www.advantech.com/support where you can find the latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information... -
Page 7: Safety Instructions
Safety Instructions Read these safety instructions carefully. Keep this User Manual for later reference. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible. - Page 8 RESTRICTED ACCESS AREA: The equipment should only be installed in a Restricted Access Area. DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein. DS-862 User Manual...
-
Page 9: Packing List
Packing List Before installation, please ensure the following items have been shipped: 1 x DS-862 series 1 x 19V DC Adapter 1 x China RoHS Sheet 1 x Simplified Chinese user manual 1 x Power Cord bracket 1 set x mounting kit... -
Page 10: General Introduction
Chapter General Introduction This chapter gives background information on DS-862 series. DS-862 User Manual... -
Page 11: Product Features
Introduction Advantech DS-862 Digital Signage Player, combines a 3rd generation Intel® Core™ i7 CPU with discrete AMD Radeon™ E6460 GPU graphics to drive 4 screens via 4 DisplayPort and the most intricate content up to 3840 x 2160 @ 30hz per screen. As small a footprint as a notebook, DS-862 can be easily integrated and hidden behind the screen. -
Page 12: Mechanical Specification
4 x DisplayPort 4 x USD 3.0 compliant 1 x Line-out Ethernet Chipset: 1 x Intel 82579LM Speed: 100/1000 Mbps – – Interface：1 x RJ-45 jacks with LED Standard：IEEE 802.3z/ab (1000 Base-T) or IEEE 802.3u 100 Base-T compliant – Resolution: –... -
Page 13: Power Requirements
1.4.2 Weight 2 kg (4.41 lbs) Power Requirements 1.5.1 System Power Minimum power input: DC19V, 3.42A 1.5.2 RTC Battery 3V/200mAH BR2032 1.6 Environmental Specifications 1.6.1 Operating Temperature 0° C - 40°C (32~104°F) with HDD 1.6.2 Relative Humidity 95% @ 40°C ( Non Condensing ) 1.6.3 Storage Temperature -20 ~ 70°C (-4~158°F) - Page 14 Chapter Hardware Installation This chapter introduces external IO and the installation of DS-862 Series Hardware DS-862 User Manual...
- Page 15 DS-862 Series I/O Connectors 2.2.1 Power ON/OFF Button DS-862 Series has a power ON/OFF button on the front side. Push this button to turn the system ON and OFF. It also supports a 4 second delay soft power off. Figure 2.3：Power Button 2.2.2...
-
Page 16: Usb Connectors
2.2.3 USB Connectors DS-862 Series provides four USB interface connectors, which gives complete Plug & Play and hot swapping capability for up to 127 external devices. The USB interface is compliant with USB UHCI, Rev. 3.0. The USB interface supports Plug and Play, which enables you to connect or disconnect a device without turning off the system. -
Page 17: Audio Connectors
DisplayPort Connector DS-862 Series not only uses DisplayPort to achieve higher resolutions by low pin but also allows data packets to be extensible, meaning additional features can be added over time without significant changes to the physical interface itself. DisplayPort can be used to transmit audio and video simultaneously, but each one is optional and can be transmitted without the other. - Page 18 ML_Lane 0 (n) ML_Lane 1 (p) ML_Land 1 (n) ML_Lane 2 (p) ML_Lane 2 (n) ML_Lane 3 (p) ML_Lane 3 (n) CONFIG1 CONFIG2 AUX CH (p) AUX CH (n) Hot Plug Return DP_PWR DS-862 User Manual...
-
Page 19: Hardware Installation
Hardware Installation 2.3.1 HDD Bracket Installation Fix HDD with screws on the HDD bracket Figure 2.13：HDD Bracket Installation 2.3.2 HDD Installation Insert HDD and fasten it with screw. Figure 2.14：HDD Installation DS-862 User Manual... - Page 20 2.3.3 Memory Module Installation - Top Side Remove the top cover by loosening 6 screws and then insert Memory Module into SO-DIMM socket. Figure 2.15：Memory Module Installation-Top Side DS-862 User Manual...
- Page 21 2.3.4 MiniPCIe Card/Memory Module Installation - Bottom Side (1) Loosening 6 screws from the bottom cover. (2) Loosening 4 screws from right side and left side. (3) Lift the bottom cover and then insert MiniPCIe and Memory Module into socket Figure 2.16：MiniPCIe Module/Memory Module Installation-Bottom Side DS-862 User Manual...
- Page 22 2.3.5 Power Cord Bracket Installation Connect a power cord to DS-862 along with the bracket, then fix the bracket with a screw to prevent power cord from falling off. Figure 2.17：Power Cord Bracket Installation DS-862 User Manual...
- Page 23 No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permission of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2013 DS-862 User Manual...
- Page 24 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Advantech DS-862GB-U5A1E DS-862GF-U5A1E DS-862GF-U2A1E DS-862GB-U2A1E DS-862GB-S6A1E DS-862GF-S6A1E...